MuJoCo model of the V7 intake, 4-pocket windmill, feed blade, gate arm and Hogback launcher (2026-11-17 chain sim, export of the 11-15 build). Run in your browser.
This is the V7 model, not the old V1 one. The geometry is the packed CAD export of the V7 robot as built on 2026-11-15 (the model behind the 114 / 120 HIVE result). Press Run V7 cycle: four balls are driven onto the intake one at a time, the windmill indexes 90 deg after each, then the flywheel spins up, the gate arm lifts and the blade feeds each ball into the Hogback. The controller is a JavaScript port of the chain-sim controller (rigs/e2e/e2e_run.py). Not in the browser version: the post-load hold test, FLOWER, jam detection on the intake, and the CAD changes made after 2026-11-15 (floor A F17, wedge v6, D3, underplate). Ball sizes and entry positions use a different random generator from the Python runs, so single cycles do not match the Python seeds ball for ball. Every input is tagged measured, source or assumed.
Earlier study (V1/V4/V5-era, stock robot and earlier CAD). It does not show the final V6 or V7 designs: see the Final V6 / V7 tab.
Loading physics and robot model (about 4 MB the first time)...